Tech Bulletin: Support of Modems Over 2400 Baud w/ Remote PC
                          NOVELL TECHNICAL BULLETIN

          TITLE:    Support of Modems Over 2400 Baud w/ Remote PC
    DOCUMENT ID:    TB.P.191
           DATE:    8/13/87
        PRODUCT:    NetWare
PRODUCT VERSION:    NetWare Remote
     SUPERSEDES:    NA

        SYMPTOM:    NA

ISSUE/PROBLEM

     The "NetWare Remote" product, as explained in the "NetWare Product
     Reference Guide," will support baud rates up to 19.2 as long as the modem
     can provide a constant connection at the specified speed.

     In tests conducted with a majority of the "high speed" modems, we have
     found that these modems cannot provide a constant baud rate. This is
     because the modem must constantly adjust and re-configure for line
     conditions.  The NetWare Remote software expects acknowledgements to be
     returned within a specified time frame, or the shell will time out.  In
     addition, the remote software provides no flow control and will continued
     to transmit data whether or not the modem is prepared to receive it.

     Please be aware of this situation when configuring systems or when
     providing pre-sale information.





Tech Bulletin: NetWare 68 Network Maintenance Manual Error
                          NOVELL TECHNICAL BULLETIN

          TITLE:    NetWare 68 Network Maintenance Manual Error
    DOCUMENT ID:    TB.P.191a
           DATE:    8/13/87
        PRODUCT:    NetWare
PRODUCT VERSION:    NetWare 68
     SUPERSEDES:    NA

        SYMPTOM:    NA

ISSUE/PROBLEM

     An error has been found when using the COMPSURF.I utility in the NetWare
     68 Network Maintenance manual.  Revisions 1.00 and 1.01 state on page 2-
     1 that running the COMPSURF.I utility without formatting and running only
     the surface analysis will not destroy data on the disk.  Page 2-18 also
     alludes to the same possibility.  This is not true and all data will be
     lost.

     This error should be noted in any Revision 1.00 or 1.01 manual.  The
     software manual has been corrected in Revision 1.02.





Tech Bulletin: Support of Modems over 2400 Baud with the Remote PC.
                          NOVELL TECHNICAL BULLETIN

          TITLE:    Support of Modems over 2400 Baud with the Remote PC.
    DOCUMENT ID:    TB.P.191b
           DATE:    8/13/87
        PRODUCT:    NetWare
PRODUCT VERSION:    NetWare Remote
     SUPERSEDES:    NA

        SYMPTOM:    NA

ISSUE/PROBLEM

     The "NetWare Remote" product, as explained in the "NetWare Product 
     Reference Guide," will support baud rates up to 19.2 as long as the modem 
     can provide a constant connection at the specified speed.

     In tests conducted with a majority of the "high speed" modems, we have
     found that these modems cannot provide a constant baud rate.  This is 
     because the modem must constantly adjust and re-configure for line
     conditions.  The NetWare Remote software expects acknowledgements to be
     returned within a specified time frame, or the shell will time out.  In
     addition, the remote software provides no flow control and will continue
     to transmit data whether or not the modem is prepared to receive it.

     Please be aware of this situation when configuring systems or when
     providing pre-sale information.